可應用于 2400-2483.5 MHz ISM/SRD 頻段的系統，消費類電子，無線鍵盤和鼠標，無線音頻，無線體育和休閑設備，低功耗遙感勘測以及USB Dongle.本解決方案介紹了CC2510Fx / CC2511Fx主要性能，方框圖，以及幾種電路圖和評估板的詳細電路圖和所用的外接元器件清單（BOM）。
TICC2510Fx / CC2511Fx Low-Power SoC (System-on-Chip) with MCU, Memory,2.4 GHz RF Transceiver, and USB Controller
產品概述：
The CC2510Fx/CC2511Fx is a true low-cost 2.4GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent
performance of the state-of-the-art RF transceiver CC2500 with an industry-standard
enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of
RAM, and many other powerful features. The small 6x6 mm package makes it very suited
for applications with size limitations.
The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the
high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.
主要特性：
Radio
High-performance RF transceiver based on the market-leading CC2500
Excellent receiver selectivity and blocking performance
High sensitivity (-103 dBm at 2.4 kBaud)
Programmable data rate up to 500 kBaud
Programmable output power up to 1 dBm for all supported frequencies
Frequency range: 2400 – 2483.5 MHz
Digital RSSI / LQI support
Current Consumption
Low current consumption (RX: 17.1 mA @ 2.4 kBaud, TX: 18.5 mA @ -6 dBm output
power)
0.3 μA in PM3 (the operating mode with the lowest power consumption)
MCU, Memory, and Peripherals
High performance and low power 8051 microcontroller core.
8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx )
I2S interface
7-12 bit ADC with up to eight inputs
128-bit AES security coprocessor
Powerful DMA functionality
Two USARTs
16-bit timer with DSM mode
Three 8-bit timers
Hardware debug support
21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
General
Wide supply voltage range (2.0V – 3.6V)
Green package: RoHS compliant and no antimony or bromine, 6x6mm QLP36
應用：
2400-2483.5 MHz ISM/SRD band systems
Consumer electronics
Wireless keyboard and mouse
Wireless voice-quality audio
RF enabled remote controls
Wireless sports and leisure equipment
Low power telemetry
CC2511Fx: USB dongles
圖1 器件方框圖
圖2。CC2510Fx 應用電路圖(不包括電源去耦電容)
圖3 帶基本晶體的CC2510Fx 應用電路圖(不包括電源去耦電容)
圖4。帶3次諧波晶體的C2510Fx 應用電路圖(不包括電源去耦電容)
表1外接元件表（不包括電源去耦電容)
表2 CC2510Fx/CC2511Fx應用電路材料清單（BOM）
詳情請見數據表：
http://focus.ti.com/lit/ds/symlink/cc2510f16.pdf
CC1110DK /CC2510DK 開發套件
SmartRF®04DK Development Kit.
The SmartRF04DK Development Kit includes a number of functions and applications that
allows quick testing of the RF interface and peripherals of the chip.
Evaluate the SmartRF®04 products. Right out of the box, the kit can be used for
range testing.
Use SmartRF® Studio to perform RF measurements. The radio can be easily
configured to measure sensitivity, output power and other RF parameters.
Prototype development. The SmartRF04DK includes a USB interface that can be
used as emulator interface for the CC1110/CC2510. All CC1110/2510 I/O ports are
available on pin connectors on the edge of the board to allow external applications
easy access to the CC1110/2510. These connectors are also compatible with logic
analyser probes for easy debugging.
SmartRF®04EB硬件描述：
圖5 SmartRF04DK 概述
下面是SmartRF04DK電路圖
圖6SmartRF04DK電路圖（1）
圖7SmartRF04DK電路圖（2）
圖8SmartRF04DK電路圖（3）
圖9SmartRF04DK電路圖（4）
圖9SmartRF04DK電路圖（5）
圖10SmartRF04DK電路圖（6）
圖11。SmartRF04DK電路圖（7）