GE Fanuc 公司的AT2-5800是基于兩個高性能的OCTEON™ Plus(CN5860-SCP, 16核 @750MHz)多核處理器,非常適合需要線速IP包處理的諸如3G/4G無線通信和IPTV的應用.本文介紹了OCTEON Plus CN58XX處理器的主要性能,方框圖,以及系統應用方框圖和AT2-5800刀片開發板的主要性能和方框圖.

　　OCTEON Plus CN58XX 4 to 16-Core MIPS64-Based SoCs
The OCTEON™ Plus CN58XX family of Multi-core MIPS64 processors targets intelligent networking, control plane, storage, and wireless applications in next-generation equipment from 2 Gbps to full-duplex 10 Gbps (20 Gbps) performance.

　　The family includes 12 different software-compatible parts, with four to sixteen cnMIPS64 cores on a single chip that integrate next-generation networking I/Os along with the most advanced security and application hardware acceleration to deliver a 2x – 3x performance, power and real-estate value proposition over alternatives.

OCTEON Plus CN58XX主要特性:
Fully pin and software compatible with the leading OCTEON CN38XX/CN36XX family
4-16 cnMIPS CPU cores (MIPS64/32 compatible) with MMU
Available in 600 MHz to 1 GHz versions
Enhanced MIPS64 integer (Release2) instruction set
Dual-issue, five-stage pipeline, optimized latencies
Auto instruction pre-fetching and advanced data pre-fetching features to minimize memory stalls
High-performance coherent memory subsystem
1MB or 2MB ECC protected 8-way set associative L2 cache with locking, partitioning features for optimal performance
Integrated mainstream 128/144b DDR2 memory controller with ECC, up to DDR2-800
Optional, additional, low-latency 2x18b or 4x9b RLDRAM2 for content based processing, meta-data and TCAM connectivity
Integrated Coprocessors for Application Acceleration
Packet I/O processing, QoS, TCP Acceleration
Support for IPsec, SSL, SRTP, WLAN and UMTS/LTE security (includes DES, 3DES, AES-GCM, AES up to 256, SHA1, SHA-2 up to SHA-512, RSA up to 8192, DH, KASUMI)
Regular Expression, Compression/Decompression
Integrated high-performance networking interfaces
Up to 2 sets of I/Os - each con_gurable as 4x 10/100/1000 Ethernet MACs (RGMII) or SPI-4.2
Integrated 64-bit, 133 MHz PCI-X host or slave
Comprehensive development environment with Linux, VxWorks and C/C++ support
Optimized Power Consumption: 18W – 40W
Package: 1521 FCBGA

優勢:
Market-Leading Performance
Up to 32 Billion instructions per second
Leading-edge application performance
Up to 30 Mpps 64B IP forwarding
Full Duplex up to 10 Gbps for TCP, IPsec, SSL, KASUMI
Up to 5 Gbps for Regular Expression
Compression/Decompression
Double L1/L2 caches and up to 3x Interconnect bandwidth along with 1 GHz Core delivers up to 2x performance over OCTEON CN38XX
Sophisticated Hardware Based QoS Support
Queuing, scheduling
Very low latency for real-time tra_c
Reduced BOM Cost with Essential Interfaces for Standalone Routers/Appliances, Line-card and Services-card Applications
Flexible Architecture allows Host and Coprocessor Implementations
Industry-Standard Programming Model without any need for Proprietary Tools or Micro-coding
Fully Software Compatible with OCTEON CN31XX and CN30XX to deliver 1- 16 CPU scalability
2x – 3x Advantage over Alternative System Architectures in Performance and Power for L4-L7 Data and Security Services
2x performance/watt over OCTEON CN38XX


OCTEON Plus的應用:
Next generation integrated, standalone routers and appliances
Uni_ed Threat Management (UTM) appliances with Firewall, VPN (IPsec, SSL), IDS, IPS and Anti-virus scanning
Application aware/L4+ content processing and switching
Network acceleration cards for security, TCP, content processing, compression
Integrated management and route processor cards
Switch/router line card and services card control and datapath processing
TCP, iSCSI, RDMA, compression processing for storage applications
Wireless LAN switch/appliance security and packet processing
Wireless WAN security, control and packet processing including 3G/4G/LTE and WiMAX

OCTEON Plus CN58XX詳情性能見:
http://www.cavium.com/pdfFiles/CN58XX_PB_Rev_1.pdf
AT2-5800刀片開發板
The AT2-5800, based on two high performance OCTEON™ Plus multi-core processors, is ideal for application services such as 3G/4G Wireless and IPTV that demand wire-speed IP packet processing. By enabling data and control plane services in the same form factor, the AT2-5800 provides efficient packet processing as well as significant performance and cost advantages.

The AT2-5800 blade is designed to enable rapid application development using open, modular, highly available systems based on AdvancedTCA architectures. Dual Cavium OCTEON 16-core CN5860-SCP processors 750MHz with 2 Mbyte of shared L2 cache memory provide up to 10 Gbit/s line-speed core processing for network Layers 2-7. With dual 16-core processors, this blade has 32 MIPS64 cores for high-speed packet processing.

To optimize application performance, the CN5860-SCP supports a dual-issue, five-stage pipeline and optimized latencies as well as auto instruction pre-fetching and advanced data pre-fetching features to minimize memory delays.

This packet processor AdvancedTCA blade can be configured to enable a wide variety of applica¬tions. Up to 16 Gbyte (8 Gbyte per processor) of high-speed, low-latency DDR2 memory is imple¬mented as packet memory.

Rear Transition Module (RTM) I/O
I/O operations are provided through a RTM. For application flexibility, the AT2-5800 supports multiple RTM configuration options including any combination of up to 10 ports of IEEE 1000BaseT, 1000BaseSX, or 1000BaseLX via Small Form Factor Pluggable (SFP) transceivers.

Software
The AT2-5800 software implementation is a comprehensive development package designed to improve time-to-revenue. The software development package is optimized to simplify application integration for multi-core processor development environments.
Intelligent Platform Magement Interface (IPMI)
Designed for high availability applications, the AT2-5800 includes an Intelligent Platform Management Controller and firmware subsystem that provides blade management services compliant with IPMI v1.5 or v2.0. This includes blade level parameters, monitoring voltage and temperature conditions, maintaining system status, and managing hot swap operations.

At its lowest level, the AT2-5800 software includes a Universal Boot loader (U-Boot) and a compre¬hensive Power On Self Test (POST) embedded in the firmware. U-Boot loads user application code from the network (e.g. TFTP server) or via local Flash memory.

A Linux Support Package (LSP), Application Program Interface (API) and sample applica¬tion code designed to exercise the AT2-5800 are provided to aid in application development. The Linux Support Package includes Wind River Carrier Grade Linux Operating System (PNE-LE) with Cavium Software Development Kit and user application diagnostics. Other operating systems are available upon request.

主要特性:
Interface Support
Supports two intelligent high-performance Cavium OCTEON™ Plus 16-core CN5860-SCPs (Secure Communications Processors) with up to 750 MHz
SPI-4.2 Interface for processor interconnection
Up to 8 Gbyte of high-speed DDR2 packet memory per CN5860 processor
10x1 Gigabit Ethernet (GbE) copper or fiber SFP ports via Rear Transition Module (RTM) I/O
Up to 16 Mbyte RAM of Persistent Memory
Redundant 1 GbE base interface
Redundant 10 GbE fabric interface
Designed for NEBS compliance
PICMG Compliance/Form Factor
PICMG 3.0 R2.0 ECN002 compliant
PICMG 3.1 Option 9 compliant
Firmware/Software Support Available
IPMC Management Sub-System
Wind River PNE-LE Carrier Grade Linux® Operating System
U-Boot, LSP, POST
Product Reliability
Telco-grade reliability calculated via Telcordia SR 332 Issue 1
Technical support for OEM customers and resellers
Network Access/Edge Applications
Session Border Controller (SBC)
Firewall
Secure Access Gateway
Network Address Translation (NAT)
Traffic Management
Router/Switch

主要指標:
Processors
Dual OCTEON™ Plus CN5860-SCP, 16-core @750MHz
Memory
Up to 8 Gbyte of DDR2 SDRAM per processor
Up to 256 Mbyte Flash memory per processor
Front-Panel
x3 Micro-DB9 interfaces
x2 1Gigabit Ethernet control plane interfaces
Status LEDs
Base Interface
Redundant 1 GbEs (Dual Star)
Fabric Interface
Redundant 10 GbE XAUIs (Dual Star)
RTM I/O
Line I/O - 10x 1 GbE via SFP connectors
Control plane – 2x 1 GbE via SFP connectors
PICMG Compliance/Dimensions
PICMIG 3.0
PICMG 3.1 Option 9
8U single slot AdvancedTCA format
Height: 12.68 in. (322.25mm)
Depth: 11.0236 in. (280mm)
Blade weight: 7.252 lbs (3.289 Kg)
RTM weight: 1.572 lbs (0.713Kg)
Power Requirements
-48 VDC
200 watts
Environmental
Temperature - Operating: 0° to +55 °C- Storage -40° to +85 °C
Relative Humidity- Operating: 5% to 95%, noncondensing- Storage: 5% to 95%, noncondensing
Regulatory Compliance
CE Mark
Emissions - FCC 47CFR Part 15 Class A (USA) - EN55022: 1998/A1:2000/A2:2003 Class A ITE (EU) - EN55024- VCCI Class A ITE (Canada) - AS/NZ CISPR 22:2002 Class A (Aus. New Zealand) - ICES-003 Issue 3 Class A (Canada) - VCCI Class A ITE - EMC Directive 89/366/ECC
Immunity - EN55024:1998/A1:2001/A2:2003 (EU)- EN ETS 300 386
Safety- UL60950-1 (USA)- CSA 22.1 no. 60950-1-03 (Canada))- EN 60950-1 (EU)
RoHS 2002/95/EC
Designed for NEBS compliance

The AT2-5800-10G is an intelligent, high-peformance IP packet processor AdvancedTCA (ATCA) blade with dual Cavium OCTEON 16-core CN5860-SCP processors @ 750MHz with 2MB shared L2 cache memory providing up to 10Gb/s line-speed processing for network layers 2-7. With dual processors, this blade is ideal for application services such as 3G/4G Wireless and IPTV that demand wire-speed IP packet processing. By enabling data and control plane services in the same form factor, the blade provides efficient pack processing as well as significant performance and cost advantages.

With dual 16-core processors, AT2-5800-10G has 32 MIPS64 cores for high-speed packet processing. Up to 16GB (8GB per processor) of high-speed, low-latency DDR2 memory is implemented as packet memory.
I/O operations are provided through a Rear Transition Module (RTM).

主要特性:

Dual Cavium OCTEON Plus 16-core CN5860-SCP processors with up to 750MHz
SPI-4.2 interface for processor interconnection
Up to 8GB of high-speed DDR2 packet memory per processor
10x 1 Gigabit Ethernet copper or fiber SFP ports via RTM I/O
Up to 16MB RAM of Persistent Memory
Redundant 1 Gigabit Ethernet base interface
Redundant 10 Gigabit Ethernet fabric interface
Designed for NEBS compliance
Available software support includes: IPMC Management Subsystem; Wind River PNE-LE Carrier Grade Linux; U-Boot; LSP; POST